top of page
Standard Trims & Flashings
WEC741
Push fit end cap detail
Full end cap detail

Suitable for most conditions requiring the weathering of external wall insulation systems and rendering. Aluminium white coated with peel-off low tack film to protect the section during transportation and fixing on-site.

​

Pre-cut lengths, push-fit or welded end caps are available on request. Jointing pieces to suit any section can be supplied where continuous lengths of flashings are installed. Clips can be supplied to retain the projecting nose of the section if required.

​

Larger sizes, increased thickness or variations on any of these profiles can be manufactured to your specification, and powder coated to any standard RAL colour.

WEC721/50

WEC721/60

WEC721/70

WEC721/80

WEC721/90

WEC721/100

WEC721/110

WEC721/120

WEC721/130

WEC731/25

WEC731/35

WEC731/45

WEC731/55

WEC731/65

WEC731/75

WEC731/85

WEC731/95

WEC731/105

WEC741/50

WEC741/60

WEC741/70

WEC741/80

WEC741/90

WEC741/100

WEC741/110

WEC741/120

WEC741/130

WEC751/25

WEC751/35

WEC751/45

WEC751/55

WEC751/65

WEC751/75

WEC751/85

WEC751/95

WEC751/105

WEC751/115

WEC751/125

WEC761/30

WEC761/50

WEC761/50

WEC761/60

WEC761/70

WEC761/80

WEC761/90

WEC761/100

WEC761/110

WEC761/120

WEC761/130

WEC721
Available up to 300mm
WEC731
Available up to 305mm
WEC741
WEC751
Available up to 300mm
Available up to 305mm
WEC761
Available up to 300mm
image_2022-06-15_131952318.png
made_in_uk.png
image_2022-06-15_132252597.png
image_2022-06-15_133400358.png
bottom of page